CLM alternatives
Onit Contract Management Alternatives: Leaving the CLM Without Breaking Your Legal Spend Setup
Written by Elliot Crane Onit is best known as an enterprise legal management vendor: matters, outside counsel, legal spend and e-billing. It also sells contract products, and that is where most searches for Onit contract management alternatives start. A legal department that bought Onit for spend control and added its contract tooling later can reach a point where the contract half no longer fits, while the ELM half works fine. Replacing the whole platform to fix one half is the most common and most expensive mistake in this situation. This page treats the decision in that order. First, what Onit actually sells on the contract side, from its own site. Second, which half you are leaving. Third, a scoring sheet and five candidates, each with the case in which it would lose. ## Onit is an ELM company that also sells contract tools Onit's enterprise legal management pitch covers matter, vendor and spend management plus e-billing, and our own guide to enterprise legal management software explains that category if you need the background. Its contract lifecycle management page frames CLM as one part of a wider legal platform, under the line "Business runs on legal. Legal runs on Onit." The contract features Onit lists fall into four groups: drafting from approved templates with version tracking and routing to reviewers; a searchable repository with permissions and saved reports; reminders for renewals, payments and obligations; and AI extraction of dates, obligations and clauses, including custom extraction fields. The page also mentions AI-assisted drafting in its FAQ. It lists no prices. ## The Onit contract products, one by one Part of the confusion around Onit CLM is that it is several products, several of them acquired. Onit announced in January 2022 that it had bought SecureDocs, a California company whose products included ContractWorks, the SecureDocs data room and ReadySign. Today the CLM page groups the family like this: | Product | What Onit says it is for | What to check before leaving | |---|---|---| | ContractWorks | Repository, with a Premium tier for approvals and signing | Which tier you pay for and whether you use the Premium workflow | | OnitX CLM | Configurable contract workflows | How many custom workflows and fields you built, and who maintains them | | ReadySign | E-signatures | Where signed copies and audit trails are stored | | SecureDocs | Virtual data room | Whether deal rooms are tied to contract records | | ReviewAI | Listed under CLM in the site navigation | Whether your team relies on it for first-pass review | The second column is the one people forget. A team on ContractWorks Premium is leaving a different product from a team on OnitX CLM with twenty configured workflows, and the right alternative differs too. ## First decide which half of Onit you are leaving There are three honest versions of this decision. Leaving the contract half only. ELM works, spend control works, the contract tool does not. This is the most common case and the one this page is mostly about. The alternative must stand alone on contracts and must not break the links ELM depends on. Leaving all of Onit. The whole platform is being reviewed, perhaps at a group-wide renewal. Here you are really buying ELM again, and contracts come second. Start from ELM requirements and treat CLM as a module question. Staying inside the Onit family. The tool is too heavy, not wrong. A team on OnitX CLM that uses a handful of templates and a repository might be overpaying for configuration. ContractWorks, from the same vendor, says on its own site that every plan includes unlimited users with no per-seat fees and offers a 14-day free trial. Asking Onit about a move down is a legitimate alternative and often the fastest one. ## A scorecard for the replacement shortlist Give each candidate a score from 1 to 5 against the criteria that matter for an ELM-first department. Weight them to your own situation; the weights below suit a department leaving only the contract half. | Criterion | Weight | What a 5 looks like | |---|---|---| | Review of counterparty paper | 3 | Clause-level marking against your positions, with redlines a lawyer accepts | | Repository and search | 2 | Full-text and field search across legacy contracts, with hierarchy | | Effect on ELM links | 3 | Contract references from matters keep working, or a clean manual workaround exists | | Admin burden | 2 | A lawyer can change a template or field without a consultant | | Price clarity | 1 | Published pricing or a written quote with renewal caps | | Exit and export | 2 | Full export of documents and metadata in a format you have tested | Multiply, add, and compare. A tool that scores high on review but low on ELM links may still win, but only if you have planned the workaround. ## Five candidates, each with the case in which it would lose ### Mitratech, if one vendor for ELM and contracts is non-negotiable Mitratech lists TeamConnect for matter management and e-billing, and its product menu places HotDocs under contract automation. For a department that wants to leave Onit entirely and still keep one vendor for both halves, it is the nearest like-for-like. It loses when your contract need is review and repository rather than document assembly, because HotDocs is built for generating documents from templates. ### LinkSquares, for in-house teams that want legal-built CLM LinkSquares describes contract management software covering drafting and redlining, contract intelligence, renewals and obligations, and reporting, with AI under the LinkAI name and an AI legal assistant for drafting and research. It speaks first to legal leaders. It loses when contracts are only one of several things the platform must do, since it does not offer matter spend or e-billing. ### Agiloft, when you configured Onit heavily and want that freedom again Agiloft calls itself a data-first agreement platform and stresses that teams can change approval chains and processes without writing code or opening a support ticket. It names AI features for extraction, risk analysis and agent-based review. Departments that built many custom workflows in OnitX CLM tend to look here. It loses when nobody on the team wants to own configuration, because flexibility needs an owner. ### ContractWorks, the alternative inside Onit Already covered above. It wins when the problem was too much product. It loses when the problem was the vendor, the support, or the review quality, since you would be staying with the same company. ### Adira, for the review work only Adira is a contract workspace for lawyers, described in its own section below. It loses whenever the buyer needs anything on the ELM side, and when the buyer needs configurable cross-department workflows. ## Six questions to put to Onit before you sign anywhere else Your current vendor is also a candidate, and asking it hard questions costs nothing. Send these in writing about four months before the contract tool renews: 1. Can we drop the contract module and keep ELM at the same ELM price? Bundles are sometimes priced so that removing one half barely lowers the bill. You need the number before you can compare. 2. What would a move from OnitX CLM to ContractWorks cost, and what would we lose? Ask for a feature list against the workflows you actually run, not the brochure. 3. In what format do we get our contracts and metadata on exit? Ask for a sample export of ten real records, including custom fields, and open it yourself. 4. Which AI features are in our current licence and which are add-ons? Extraction, ReviewAI and AI-assisted drafting may sit on different price lines. 5. Who maintains our configured workflows if our admin leaves? If the honest answer is a paid professional services engagement, add that to the cost of staying. 6. What is the renewal uplift cap? If there is none in the current order form, ask for one in writing as a condition of renewing. The answers often settle the decision. A firm quote to move down inside Onit, with a capped renewal, can beat any switch on cost and risk. A vague answer on export is a reason to leave sooner rather than later, while your data is still easy to pull. ## Unpicking matter and contract links before you leave Most of the risk in changing contract tools inside an ELM-first stack is in the joins, not the documents. Work through these before any contract is moved: 1. Matters that cite contracts. Export the list of matters with a linked contract and decide whether each link becomes a document reference, a URL to the new tool, or a note. 2. Shared vendor and counterparty records. If law firms and suppliers live in one record that both halves use, decide which system owns it. 3. Joined reports. Reports that combine spend and contract data will break first. List them and tell their owners. 4. Signed copies and audit trails. If ReadySign signed your documents, export the audit trails with the PDFs. 5. Parallel running. Keep the old contract tool read-only for at least one renewal cycle of your busiest contract type. For the data side of the move, our guide to switching CLM providers in the US covers export formats and field mapping, and before you commit to any of the five, the reference-check questions will tell you more than a demo. ## How Adira compares on the contract side only Adira covers drafting and reviewing contracts, and nothing on the matter or spend side. On review, its Document Intelligence Dashboard marks each position in a document as favourable, neutral or unfavourable to your company and lists red flags, missing clauses, key dates, obligations and monetary terms. On drafting, the AI Drafting Studio builds a full contract from a brief as a structured clause tree, and Company Persona tunes the draft to your own documents and preferred terms. Clause-Level Editing takes plain-English instructions and shows a diff of each change. Files, Cases and an Activity Timeline record versions and who did what, and Teams and Action Items let a general counsel assign the next step. Contracts export to PDF or Word. On price, Adira publishes its rates, which makes it easy to score on the price-clarity row: the Firm plan is USD 179 per seat per month on annual billing (USD 219 monthly) with a five-seat minimum, so five seats come to USD 10,740 a year; the smaller Practice plan is USD 89 per seat per month annually with a three-seat minimum. A 7-day free trial is available. On integrations, Adira's pricing page lists storage, CRM and e-sign integrations by plan, so confirm the specific system with Adira; do not assume any link to Onit ELM. Adira is not the right fit for a department that wants to replace Onit ELM, or that needs one platform for matters, invoices and contracts; choose an ELM vendor for that. It is also a weaker choice than a configurable CLM if your Onit setup is mainly cross-department workflow. Adira suits the department that keeps its ELM, wants faster legal review of contracts, and can live with the contract record sitting in a separate tool.
Frequently asked questions
- What contract products does Onit sell?
- Its CLM page lists ContractWorks (a repository with a Premium tier for approvals and signing), OnitX CLM for configurable workflows, ReadySign for e-signatures, SecureDocs for virtual data rooms, and ReviewAI in its navigation. Matter and spend products such as Unity ELM, OnitX ELM, SimpleLegal and BusyLamp sit on the ELM side.
- Can I replace Onit CLM but keep Onit ELM?
- Usually yes. The work is in the links: matters that reference contracts, vendor records shared by both sides, and reports that join contract and spend data. List those links first and decide how each will work once contracts live elsewhere.
- Is ContractWorks an alternative to OnitX CLM?
- It can be, inside the same vendor. ContractWorks is Onit's lighter contract product, and its site says every plan includes unlimited users and that there is a 14-day free trial. A team that bought more configuration than it uses may find it enough.
- Which Onit alternative keeps ELM and CLM with one vendor?
- Mitratech is the closest like-for-like, with TeamConnect for matters, spend and e-billing and HotDocs listed under contract automation. Check whether its contract tooling covers review and repository work you rely on today, because HotDocs is a document assembly product.
- Is Adira an ELM replacement?
- No. Adira has no matter spend, e-billing or outside counsel management. It covers drafting and reviewing contracts, so it can replace the contract side of Onit only for a team that keeps its ELM elsewhere.
Sources
- Onit: contract lifecycle management
- Onit: announcement of the SecureDocs acquisition (ContractWorks, SecureDocs, ReadySign), January 2022
- ContractWorks: product and plans
- Mitratech: TeamConnect enterprise legal management
- LinkSquares: contract management software
- Agiloft: data-first agreement platform
- Adira: pricing
See how Adira drafts in your voice and reads contracts from your side.
Explore the showroomWorking through a contract like this? Weave is Adira’s free tool to read, mark up, and connect any contract in your browser — no account needed.
Try Weave — free